03/03/2020 13:18:43

Module - Intrusion Sensor (Remove and Replace)

Correction Code 17153002

Removal

  1. Remove the headliner (refer to procedure)
  2. Place the headliner on a clean work surface with the upholstered side facing down.
  3. Disconnect the headliner electrical harness from the intrusion sensor module connector.
  4. Disconnect the intrusion sensor electrical harness connectors (x2) from the intrusion sensor module.
  5. Release the clips (x2) that attach the intrusion sensor module to the headliner, and then remove the module from the headliner.

Installation

Installation procedure is the reverse of removal.