03/03/2020 13:18:43

Door Glass - LH - Rear - Adjust

Correction Code 11500300

Inboard/Outboard Adjustment

Informational PurposesAn informational icon, calling your attention
Note
The rear window is 4-way adjustable.
  1. Remove the rear door trim panel (refer to procedure).
  2. Loosen the nuts (x4) that secure the regulator to the door.
  3. On the affected corner, hold the nut with an open end wrench and use an allen wrench to adjust the window inboard/outboard.
  4. Repeat the previous step as necessary.
  5. Tighten the nuts (x4) that secure the window motor/regulator assembly to the door (torque 10 Nm).
  6. Reinstall the rear door trim panel.
    Informational PurposesAn informational icon, calling your attention
    Note
    If the rear window needs a fore/aft adjustment, skip to step 2 of the "Fore/Aft Adjustment" section.

Fore/Aft Adjustment

  1. Remove the closeout panel (refer to procedure).
  2. Loosen the nut that secures the front of the window to the regulator.
    Informational PurposesAn informational icon, calling your attention
    Note
    Do not remove the nut.
  3. Carefully slide the window forwards or backwards as necessary.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
  4. Tighten the nut that secures the front of the window to the window regulator (torque 9 Nm).
  5. Reinstall all components that were removed for access.