03/03/2020 13:18:43

Diffuser Panel - Rear (Remove and Replace)

Correction Code 12030802

Removal

  1. Remove the mid aero shield panel (refer to procedure).
  2. Remove the push clips that secure the diffuser to the vehicle.
  3. Remove the screws that secure the diffuser to the vehicle (torque 3 Nm).
  4. Remove the screws that secure the diffuser to the lower fascia (torque 3 Nm).
    Figure 1. RH shown, LH similar
  5. Remove the diffuser.

Installation

Installation procedure is the reverse of removal, except for the following:
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Replace any broken clips.

If a tow hitch cover was attached to the diffuser, transfer the tow hitch cover to the new diffuser.