2022-07-05
Sensor - Brake Reservoir Fluid Level (Remove and Replace)
Correction code 33200012
Remove
- Open the LH front door and lower the window.
- Remove the HEPA filter> See Filter - HEPA (Remove and Replace).
-
Release the fuse panel upwards from the fuse panel bracket (4x tabs), and
then move the fuse panel forward.
-
Release the tabs that attach the brake fluid level sensor to the brake
fluid reservoir.
-
Disconnect the brake fluid reservoir level sensor connector, and then
remove the sensor from the reservoir.
Install
Installation procedure is the reverse of removal.