03/03/2020 13:18:43

Switch - Hazard Warning (Remove and Replace)

Correction Code 17407002

Removal

  1. Remove the MCU (refer to procedure).
  2. Remove the screws (x2) that secure the hazard warning switch to the touchscreen surround (torque 1 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    Components have been removed in this graphic to aid clarity.
  3. Disconnect the electrical connector from the hazard warning switch.
    Informational PurposesAn informational icon, calling your attention
    Note
    Components have been removed in this graphic to aid clarity.
  4. Remove the hazard warning switch from the touchscreen surround.

Installation

Installation procedure is the reverse of removal.