12/08/2020 16:22:39
Module - Electric Park Brake - EPB (Remove and Replace)
Correction Code 33050102
Removal
- Disconnect 12V power (refer to procedure).
- Remove the upper C-Pillar trim panel (refer to procedure).
- Disconnect the electrical connectors (x2) from the bottom of the electric park brake (EPB) module.
-
Remove the nuts (x3) that
attach the EPB module to the studs on the wheelhouse (torque 3.5 Nm).
NoteComponents have been removed in this graphic to aid clarity.
- Remove the EPB module from the vehicle.
Installation
Installation procedure is the reverse of removal, except for the following:
- Update the vehicle firmware. See Firmware Update.