19/03/2021 08:33:51
Blower Motor - Front HVAC (Remove and Replace)
Correction Code 18103202
Removal
- Open both front doors and the RH rear door.
- Disconnect 12V power (refer to procedure).
- Remove the RH footwell cover (refer to procedure).
- Remove the RH lower A-pillar trim (refer to procedure).
- Carefully peel back the carpet for access.
- Remove the RH primary carpet support from the vehicle.
-
Disconnect the electrical connector from the fan motor.
-
Remove the screws (x3) that secure the fan motor (torque 1.2 Nm).
- Remove the fan motor from the front HVAC assembly.
Installation
Installation procedure is the reverse of removal.