03/03/2020 13:18:43

Bracket - Headlight Support - LH (Remove and Replace)

Correction Code 17406002

Remove

  1. Remove the headlight (refer to procedure).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Note the routing of the harness through the headlight bracket. Ensure that is routed correctly during reinstallation.
  2. Release the positive and negative wires from the horn.
  3. Release the fir tree clip that secures the harness to the headlight bracket.
  4. Release the harness from the crash sensor.
  5. Release the clip that secures the headlight harness to the headlight bracket.
  6. Move the harness out of the way of the headlight bracket.
  7. Release the bolts that secure the headlight carrier to the underhood crossmember (torque 7 Nm).
  8. Release the bolts and washers that secure the headlight carrier (torque 7 Nm).
  9. Release the push clip that secures the headlight bracket to the windshield washer fluid reservoir.

Installation

Installation procedure is the reverse of removal, except for the following:

  • Replace any shims between the carrier and fender.
  • Transfer the horn to the new bracket.
  • Transfer the crash sensor to the new bracket.