12/03/2021 06:37:50

Seal - Axle - Front Drive Unit - RH (1st Generation) (Remove and Replace)

Correction Code 39301102

Special tool(s) required for this procedure:

Part Number Description
1051509-00-A Output Seal Installation Tool
1454928-00-A TOOL, SEAL PULLER, ADJUSTABLE, MS/MX/M3
Informational PurposesAn informational icon, calling your attention
Note
Technicians may use this tool or equivalent.

Removal

  1. Remove the jackshaft assembly. See Jackshaft Assembly - Front (Remove and Replace).
  2. Use the seal puller to remove the seal from the differential casing.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).

Installation

Informational PurposesAn informational icon, calling your attention
Note
Clean the affected areas before installation.
  1. Install the new axle seal on the front drive unit using the output seal driver tool and a dead blow hammer.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
  2. Ensure that the seal is seated correctly in the differential casing.
  3. Install the jackshaft assembly. See Jackshaft Assembly - Front (Remove and Replace).