11/01/2023 05:12:53

Seal - Rear Door Cantrail - LH (Remove and Replace)

Correction Code 11705402

Removal

  1. Remove the upper rear door glass. See Door Glass - Rear - Upper - LH (Remove and Replace).
  2. Remove the front (x2) and rear (x2) screws that secure the ends of the LH rear door cantrail seal to the LH rear door (torque 3.5 Nm).
    Figure 1. Front end shown, rear similar.
  3. Loosen, but do not remove, the outer nuts that secure the seal to the rear door (torque 5 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    Do not remove the seal at this time.
    Figure 2. Seal shown with nuts.
  4. Move the rear door to a position that allows the remainder of the seal nuts to be accessible.
  5. Loosen, but do not remove, the inner nuts that secure the seal to the rear door (torque 5 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    Do not remove the seal at this time.
  6. Step outside the vehicle and partially close the rear door.
  7. From outside of the vehicle, remove the seal from the door.
    Informational PurposesAn informational icon, calling your attention
    Note
    Open the rear door slightly to aid with the removal of the seal from the vehicle.

Installation

Installation procedure is the reverse of removal.