03/03/2020 13:18:43

Riser - Driver's Seat - Outer (Remove and Replace)

Correction Code 13012002

Special tools required for this procedure:

Supplier Part Number Description
Tesla 1032900-00-A Heat Inductor Tool (NA)
Tesla 1032900-01-A Heat Inductor Tool (EU)
Tesla 1032900-02-A Heat Inductor Tool (UK)

Removal

  1. Remove the driver's seat (refer to procedure).
  2. Use a trim tool to release the clips that secure both covers to the seat riser.
  3. Remove and discard the bolts (x2) that secure the seat riser to the body of the vehicle (torque 34 Nm). Remove the washers (x2).
    Informational PurposesAn informational icon, calling your attention
    Note
    If the bolts are difficult to remove, use the heat inductor tool to heat each bolt for 20 seconds, and let the bolt sit for 2 minutes before removal.
  4. Remove the outer seat riser from the vehicle.

Installation

Installation procedure is the reverse of removal, except for the following:
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Replace all patchbolt(s).
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Replace any broken clips.