02/03/2020 13:50:14

Trim - Headrest - Driver's (Remove and Replace)

Correction Code 13042002

Removal

  1. Remove the driver's seat back cover (refer to procedure).
  2. Remove the foam piece from the rear of the headrest.
    Figure 1. Foam highlighted
  3. Remove and discard the screws (x4) that secure the headrest trim to the seat (torque 5 Nm).
  4. Remove the headrest trim from the front of the seat.

Installation

Installation procedure is the reverse of removal, except for the following:

Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Replace any broken clips.
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Replace all patchbolt(s).