31/01/2023 06:23:35

Seat Back Carpet - 3rd Row - LH (Remove and Replace)

Correction Code 13064002

Special tools required for this procedure:

Part Number Description
1054713-00-A Kit, rivet assortment with gun

Removal

  1. Open the LH rear door.
  2. Move the 2nd row LH seat to the "Easy Entry" position.
  3. Open the liftgate.
  4. Remove the trunk floor carpet (refer to procedure).
  5. Fold the 3rd row LH seat flat.
  6. Use an electric drill with a 5 mm (3/16 in) drill bit to remove the rivets at the bottom of the 3rd row LH seat back.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use a vacuum cleaner to collect debris.
  7. Use a plastic trim tool to pry off the seat back carpet. Remove and retain the washers that function as spacers between the metal seat back panel and carpet.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    To avoid damage to the metal seat back panel, only pry with a plastic trim tool.
    Informational PurposesAn informational icon, calling your attention
    Note
    The rivets go through the washers that function as spacers.
    Figure 1. Seat Back Carpet Attachment Points

Installation

Installation procedure is the reverse of removal, except for the following:

  • Replace all damaged washers.

  • Use a rivet gun to replace all rivets that were removed.

  • Move the 2nd row LH seat back to the original position.