03/03/2020 13:18:43

Retainer - Sill - Rear - LH (Remove and Replace)

Correction Code 10105202

Removal

  1. Remove the HV Battery (refer to procedure).
  2. Remove the rear LH wheel arch liner (refer to procedure).
  3. Drill out the rivets (x3) that secure the sill retainer to the frame rail.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Wear protective eyewear and hearing protection when drilling.
  4. Working from the rear wheel well, slide the sill retainer out from the frame rail.
    Tip: Use a screwdriver to push up on the sill retainer from the bolt holes if the sill retainer is snagged on the frame rail.
  5. Discard the barrel nuts.

Installation

  1. Hold the new sill retainer up to the frame rail and ensure that the holes line up correctly.
    Informational PurposesAn informational icon, calling your attention
    Note
    The front and rear sill retainers are not interchangeable.
  2. If necessary, lower the vehicle to a comfortable working height.
  3. Place new barrel nuts in their proper location on top of the new sill retainer.
  4. Carefully push the new sill retainer into the frame rail towards the front of the vehicle until the holes are aligned.
  5. Install rivets (x3) to secure the sill retainer to the frame rail.
    Tip: Have an assistant temporarily hold the sill retainer in place with one of the other rivets while installing the first rivet.
  6. Reinstall the rear wheel arch liner (refer to procedure).
  7. Install the HV Battery (refer to procedure).