03/03/2020 13:18:43
Hose - Drain - Cowl Screen (Remove and Replace)
Correction Code 12251402
Removal
- Raise and support the vehicle on a 2-post lift (refer to procedure).
- Remove the rear underhood apron (refer to procedure).
- Remove the LH and RH underhood aprons (refer to procedure).
- Remove the underhood storage unit (refer to procedure).
- Remove the HEPA filter housing (refer to procedure).
-
Release the hose clamp that attaches the cowl screen drain hose to the cowl, and then move the hose aside.
- Remove the front aero shield (refer to procedure).
-
Remove the clip that attaches the cowl screen drain hose to the front subframe assembly.
-
Remove the cowl screen drain hose from the vehicle by pulling it straight down.
NoteIt might be necessary to twist the cowl screen drain hose while removing it from the vehicle.
Installation
- Lower the vehicle fully.
-
Put the new cowl screen drain hose onto the vehicle. Attach the hose to the cowl and secure it with a clamp.
NoteMake sure that the hose is routed correctly.
- Raise the vehicle fully.
-
Install the clip that attaches the cowl screen drain hose to the front subframe assembly.
- Install the front aero shield (refer to procedure).
- Install the HEPA filter housing (refer to procedure).
- Install the underhood storage unit (refer to procedure).
- Install the LH and RH underhood aprons (refer to procedure).
- Install the rear underhood apron (refer to procedure).
- Close the hood and the LH front door, and then remove the vehicle from the lift.