03/03/2020 13:18:43

Switch - Glove Box (Remove and Replace)

Correction Code 17302102

Removal

  1. Remove the MCU (refer to procedure).
  2. Remove the screws (x2) that secure the glove box switch to the touchscreen surround (1 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    Components have been removed in this graphic to aid clarity.
  3. Disconnect the electrical connector from the glove box switch.
    Informational PurposesAn informational icon, calling your attention
    Note
    Components have been removed in this graphic to aid clarity.
  4. Remove the glove box switch from the touchscreen surround.

Installation

Installation procedure is the reverse of removal.