2020-03-03

Switch - Adjust - Driver's Seat (Remove and Replace)

Correction Code 13011002

Removal

  1. Remove the driver's seat outer cover (refer to procedure).
  2. Remove the screws (x4) that attach the switch to the cover (torque 0.9 Nm).
  3. Remove the switch from the cover.

Installation

Installation procedure is the reverse of removal, except for the following:
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Avoid stripping the holes in the side cover. Install the screws slowly when attaching the switch to the side cover.