03/03/2020 13:18:43

Actuator - Latch - Hood (Remove and Replace)

Correction Code 11352202

Removal

  1. Use a trim tool to remove the tow hook cover.
    Informational PurposesAn informational icon, calling your attention
    Note
    Insert the trim tool into the notch at the top right portion of the tow hook cover.
  2. Release both hood latch manual release straps.
  3. Remove the front underhood storage unit (refer to procedure).
  4. Remove the bolts (x3) that secure the actuator bracket to the front end module (FEM) (torque 10 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    Components have been removed in this graphic to aid clarity.
  5. Lift the actuator assembly above the FEM.
  6. Release the electrical connectors (x2) from the bottom of the actuator assembly.
  7. Release the edge clips (x3) that secure the hood latch cable to the FEM.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Replace any broken clips.
  8. Release both hood latch cables (x2) from the latch assembly.
  9. Release the post clip from the 12V harness.
  10. Remove the actuator from the vehicle.

Installation

Installation procedure is the reverse of removal.