03/03/2020 13:18:43

Latch - Door - Front - LH (Remove and Replace)

Correction Code 11351002 Correction Code 11350802

Choose the appropriate procedure based on the vehicle's configuration and date of manufacture:

1st Generation

Removal

Correction Code 11351002

  1. Remove the LH front door closeout panel (refer to procedure).
  2. Release the manual release cable from the front door interior release handle.
  3. Release the screws (x3) that secure the door latch to the door (torque 10 Nm).
  4. Maneuver the latch through the opening in the door shell and disconnect the electrical connector.
  5. Remove the latch from the vehicle.

Installation

Installation procedure is the reverse of removal.

2nd Generation

Removal

Correction Code 11350802

  1. Remove the LH front door closeout panel (refer to procedure).
  2. Disconnect the electrical connector from the cinching motor.
  3. Release the fir tree clip that secures the latch release cable to the inside of the door shell.
  4. Release the lower rear nut that secures the window regulator (torque 10 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    This allows the regulator to be repositioned for access.
  5. Working inside the door shell, disconnect the electrical connector from the latch.
  6. Release the screws that secure the latch to the door (torque 12 Nm).
  7. Remove the latch from the vehicle.

Installation

Installation procedure is the reverse of removal.