03/03/2020 13:18:43

Antenna - Passive Entry - Rear (Remove and Replace)

Correction Code 17451802

Removal

  1. Remove the rear trunk wall trim (refer to procedure).
  2. Disconnect 12V power (refer to procedure).
  3. Disconnect the electrical connector from the antenna.
  4. Remove the screws (x2) that secure the antenna to the standoffs on the air extractor (torque 2 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    It is not necessary to completely remove the LH screw; the hole is notched.
  5. Remove the antenna from the vehicle.

Installation

Installation procedure is the reverse of removal.