08/02/2023 10:55:49
Taillight Assembly - RH (Remove and Replace)
Correction Code 17402202
Removal
- Remove the subwoofer. See Subwoofer Assembly (Remove and Replace).
- Disconnect the electrical harness from the taillight connector.
- Remove the nuts (x2) that attach the taillight to the rear of the body.
- Pull back the NVH padding and remove the nut and bolt that attach the taillight to the side of the body.
- Remove the taillight assembly from the vehicle, and place it on a soft, clean surface.
- Remove the screws (x3) that secure the dummy charge port door to the taillight, and then remove the dummy charge port door from the taillight.
Installation
- Install the dummy charge port door to the taillight, then install the screws (x3) that secure the dummy charge port door to the taillight (torque 1.25 Nm).
- Install the taillight assembly onto the vehicle, and make sure that the 3 studs and 1 datum align to the body.
- Pull back the NVH padding and install and hand-tighten the nut and bolt that attach the taillight to the side of the body.
- Install and hand-tighten the nuts (x2) that attach the taillight to the rear of the body.
- Press the taillight to the body, and tighten the nuts (x3) and the bolt that attach the taillight to the body (torque 2.5 Nm).
- Connect the electrical harness to the taillight connector.
- Install the subwoofer. See Subwoofer Assembly (Remove and Replace).