02/04/2021 07:43:25

Wiper Arm - LH (Remove and Replace)

Correction Code 17500302

Special tools recommended for this procedure:

Supplier Part Number Description
Tesla 1058696-00-A Wiper Arm Removal Tool

Removal

Informational PurposesAn informational icon, calling your attention
Note
Images show both wiper arms for convenience.
  1. Remove the rear center underhood apron (refer to procedure).
  2. At the base of the wiper arm, disconnect the washer hose from the cowl screen.
  3. Release the nut(s) that secure the wiper arm (torque 35 Nm), but do not fully remove the arm at this time.
  4. Place the base of the wiper arm removal tool under the wiper arm and position the set screw so that it is centered and touching the wiper arm stud, and then tighten the set screw until the wiper arm is released.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Removing the wiper arm without the wiper arm removal tool can result in damage to the wiper arm or wiper motor.
  5. Remove the wiper arm.
    Informational PurposesAn informational icon, calling your attention
    Note
    The washer jet hose is removed with the arm.

Installation

Installation procedure is the reverse of removal.