03/03/2020 13:18:43

Taillight Assembly - LH (Remove and Replace)

Correction Code 17402002

Special tool required for this procedure:

Supplier Part Number Description
Tesla 1082778-00-A CHARGE PORT DOOR ALIGNMENT TOOL, MX

Removal

  1. Remove the LH taillight assembly (refer to procedure).
  2. Remove the screws (x3) that secure the charge port door to the taillight assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    The charge port door and motor are removed as an assembly.
  3. Remove and retain the charge port door.

Installation

Installation procedure is the reverse of removal, except for the following:

Secure the charge port door using the charge port door alignment special tool:

  1. Make sure the screws are loose on charge port door.
  2. Align the charge port door with the top angle of the special tool, and then tighten the screws (x3) on charge port door (torque 1.25 Nm).