12/11/2021 00:48:44 Ball Cap - Front Door Drive Unit - LH (Remove and Replace) Correction Code 11333602 Parent topic: 1133 - Closure Assist Mechanisms and Hinges Remove Position the door approximately 80% of the way open. Push the front regulator track outboard to provide access to the front door drive unit. Use a small pry bar to push the push the linkage down and disconnect it from the ball stud. Remove and discard the plastic cap. Install Installation procedure is the reverse of removal.
Remove Position the door approximately 80% of the way open. Push the front regulator track outboard to provide access to the front door drive unit. Use a small pry bar to push the push the linkage down and disconnect it from the ball stud. Remove and discard the plastic cap.