Wheel Alignment

Note

All specifications given in degrees. To convert from degrees to minutes and seconds, multiple the decimal after the whole number by 60. The whole number becomes the minute. Take the remaining decimal and multiply it by 60 to get the second. For example, 1.75° would be 1° and 45 min (.75*60). 0.17° would be 10 min and 12 seconds. (0.17*60=10.2; .2*60=12).

Table 1. Air Suspension (Rear Wheel Drive)
Location	Front	Rear
Camber	-0.75° +/- 0.45°	-1.75° +/- 1.00°
Camber Split	0.00° +/- 0.30°	Not applicable
Caster	4.00° +/- 0.50°	Not applicable
Caster Split	0.00° +/- 0.20°	Not applicable
Single Wheel Toe	Out 0.05° (In 0.10° to Out 0.20°)	In 0.20° (In 0.05° to In 0.35°)
Total Toe	Out 0.10° +/- 0.30°	In 0.40° +/- 0.30°
Toe Split	Not applicable	0.00° +/- 0.20°
Suspension Bolt Height	213.5 mm +/-5 mm	144 mm +/- 5 mm (19" wheels) 151 mm +/- 5 mm (21" wheels)
Track Width (at wheel center height)	1662 mm (ref)	1698 mm (ref)
Wheelbase	------------------------ 2960 mm (ref)---------------------

Table 2. Coil Suspension (Rear Wheel Drive)
Location	Front	Rear
Camber	-0.53° +/- 0.45°	-1.25° +/- 1.00°
Camber Split	0.00° +/- 0.30°	Not applicable
Caster	3.70° +/- 0.50°	Not applicable
Caster Split	0.00° +/- 0.20°	Not applicable
Single Wheel Toe	In 0.02° (In 0.17° to Out 0.13°)	In 0.19° (In 0.04° to In 0.34°)
Total Toe	In 0.04° +/- 0.30°	In 0.38° +/- 0.30°
Toe Split	Not applicable	0.00° +/- 0.20°
Suspension Bolt Height	230.0 mm (ref)	158 mm (19" wheels) 165 mm (21" wheels)
Track Width (at wheel center height)	1662 mm (ref)	1698 mm (ref)
Wheelbase	-------------------------2960 mm (ref)---------------------

Table 3. Air Suspension (Dual Motor All Wheel Drive)
Location	Front	Rear
Camber	-0.75° +/- 0.45°	-1.75° +/- 1.00°
Camber Split	0.00° +/- 0.30°	Not applicable
Caster	4.00° +/- 0.50°	Not applicable
Caster Split	0.00° +/- 0.20°	Not applicable
Single Wheel Toe	Out 0.05° (In 0.10° to Out 0.20°)	In 0.20° (In 0.05° to In 0.35°)
Total Toe	Out 0.10° +/- 0.30°	In 0.40° +/- 0.30°
Toe Split	Not applicable	0.00° +/- 0.20°
Suspension Bolt Height (at design)	213.5 mm +/-5 mm	144 mm +/- 5 mm (19" wheels) 151 mm +/- 5 mm (21" wheels)
Track Width (at wheel center height)	1662 mm (ref)	1698 mm (ref)
Wheelbase	------------------------ 2960 mm (ref)---------------------

Table 4. Coil Suspension (Dual Motor All Wheel Drive)
Location	Front	Rear
Camber	-0.70° +/- 0.45°	-1.25° +/- 1.00°
Camber Split	0.00°+/- 0.30°	Not applicable
Caster	3.90° +/- 0.50°	Not applicable
Caster Split	0.00° +/- 0.20°	Not applicable
Single Wheel Toe	Out 0.02° (In 0.13° to Out 0.17°)	In 0.19° (In 0.04° to In 0.34°)
Total Toe	Out 0.04° +/- 0.30°	In 0.38° +/- 0.30°
Toe Split	Not applicable	0.00° +/- 0.20°
Suspension Bolt Height (at design)	217 mm (ref)	158 mm (19" wheels) 165 mm (21" wheels)
Track Width (at contact patch)	1662 mm (ref)	1698 mm (ref)
Wheelbase	-------------------------2960 mm (ref)---------------------