26/02/2024 06:19:25

Rear View Mirror - 1st Generation (Remove and Replace)

Correction Code 15050202

Informational PurposesAn informational icon, calling your attention
Note
This procedure describes how to remove and replace the 1st generation rear view mirror. If the vehicle is equipped with a 2nd generation rear view mirror, refer to procedure 15050502 (refer to procedure).

Removal

  1. Cover the dash assembly to avoid damage.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Make sure the touch screen is fully protected.
  2. Release the tabs that attach the RH (5x tabs) and LH (4x tabs) mirror finishers, and then remove the finishers.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
  3. Disconnect the mirror electrical harness connection.
  4. Carefully turn the mirror assembly counterclockwise and release it from the windshield mount.
  5. Remove the mirror.

Installation

  1. Installation procedure is the reverse of removal.