2020-03-02

Latch - Door - Front - LH (Remove and Replace)

Correction Code 11351002

Removal

  1. Remove front door trim panel (refer to procedure)
  2. Remove screws (x2) securing door latch assembly to reinforcement (torque 10 Nm).
  3. Carefully release latch assembly from door outer panel and disconnect latch harness connector.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
  4. Remove latch assembly and release cable from door.
  5. Disconnect latch release cable from latch assembly.
  6. Disconnect wiring harness connector.

Installation

  1. Installation procedure is the reverse of removal.