2020-03-02

Seat Cushion - Lower - 2nd Row - Executive - LH (Remove and Install)

Correction Code 13051401

Removal

  1. Remove the 2nd row center console (refer to procedure).
  2. Use both hands to firmly pull up on the front of the cushion to release the 2 clips that secure it to the frame. Do not fully remove the cushion at this time.
  3. Disconnect the seat heater harness and release the edge clip.
  4. Remove and discard the 2 grommets.
    Informational PurposesAn informational icon, calling your attention
    Note
    After removing the cushion, the grommets are either retained in the frame or on the seat clip.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Ensure that 2 new grommets are used during reinstallation.

Installation

Installation procedure is the reverse of removal, except for the following:

Replace the seat grommets.