21/12/2021 08:03:56
Sensor - Wheel Speed - ABS - Front - LH (Remove and Replace)
Correction Code 33100502
Warning
If the vehicle has air
suspension, activate "Jack" mode on the touchscreen before raising and
supporting the vehicle.
Removal
- Remove the road wheel for access (refer to procedure).
- Remove the screws (x3) that secure the wheel speed sensor harness bracket and wheel speed sensor (torque 8 Nm).
- Release the wheel speed sensor from the knuckle and position aside.
- Disconnect the wheel speed sensor connector and harness.
-
Release the clip that secures the wheel speed sensor to the body.
- Remove the wheel speed sensor from the vehicle.
Installation
Installation procedure is the reverse of removal, except for the following:
Note
Perform a test drive that
includes a minimum speed of 25mph in straight line for at least five seconds to
allow the ESP internal system checks to complete. The ESP faults will clear if
the vehicle is repaired correctly. If faults are persistent after the test
drive, continue troubleshooting the repair.