2020-03-02

Seal - Body - Side - Rear - Secondary - LH (Remove and Replace)

Correction Code 11700102

Removal

  1. Open the LH front and LH rear doors.
  2. Remove and discard the seal.
    Informational PurposesAn informational icon, calling your attention
    Note
    Components have been removed in this graphic to aid clarity.

Installation

  1. Make sure the vehicle body is at room temperature.
  2. Use an alcohol wipe to remove adhesive residue from the body.
  3. Align the locator post on the new seal to the hole in the body.
  4. Carefully remove the adhesive protection strips from the new seal.
  5. Install the seal, starting from the locator post and moving toward the front of the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Press firmly on the areas of the seal that have adhesive tape to fully secure the tape to the body.