1701 - 12V Battery and Fuses Vehicle HV Disablement Procedure Correction Code 17010000 Disconnect 12V Power Correction Code 17010100 Correction Code 17010200 Correction Code 17010300 12V Positive Jump Post (Remove and Replace) Correction Code 17013102 Battery - Auxiliary - 12V (Remove and Replace) Correction Code 17011212 Correction Code 17011252 Correction Code 17011302 DCDC Terminal Stud - Fuse Box - Underhood (Rework) Correction code 17012408 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See to make sure wearing proper PPE when performing the below procedure. Fusebox - Battery (LHD) (Remove and Replace) Correction Code 17012212 Fusebox - Battery (RHD) (Remove and Replace) Correction Code 17012302 Fuse Box - Cabin - Front (Remove and Replace) Correction Code 17011902 Fusebox - Underhood - 2nd Generation (Remove and Replace) Correction Code 17012402 Fuse Box - Underhood - 2nd Generation (Rework) Correction Code 17012407 12V Battery Bracket Beam (Remove and Replace) Correction Code 17012702 Bracket - 12V Battery (Dual Motor) (Remove and Replace) Correction code 17014012 E-Fuse Module (1st Generation) (Remove and Replace) Correction Code 17011602 E-Fuse Module (2nd Generation) (Remove and Replace) Correction Code 17011652 Inline Fuse - E-Fuse to Front Trunk Body Controller (175A) (Remove and Replace) Correction Code 17014102 Inline Fuse - E-Fuse to Cabin Body Controller (125A) (Remove and Replace) Correction Code 17014112 Parent topic: 17 - ELECTRICAL