02/03/2020 13:50:14

Switch - Adjust - Driver's Seat (Remove and Replace)

Correction Code 13015002

Removal

  1. Remove the driver seat outer side cover (refer to procedure)
  2. Remove the screws that attach the adjust switch to the cover.
    Informational PurposesAn informational icon, calling your attention
    Note
    Model S built after August 2016 have the same front seats as Model X.
    • For vehicles built before August 2016: Remove the screws (x3) that attach the switch to the cover (torque 1 Nm).
    • For vehicle built after August 2016:Remove the screws (x4) that attach the switch to the cover (torque 0.9 Nm).
  3. Remove the switch.

Installation

  1. Installation procedure is the reverse of removal.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Avoid stripping the holes in the side cover. Install the screws slowly when attaching the switch to the side cover.