14/09/2023 05:08:31
Line - Air Suspension (Repair)
Correction Code 31104808
Consumables required:
- 1624174-00-A: 4mm BRASS VOSS UNION
- 2023-05-22: Added part information.
Procedure
-
Inspect the damaged area on
the air line.
- Only repair the air line if the repairable section is at least 50mm away from any molded sections of the air line.
- Only repair the air line if the damage is no greater than 5mm, which is the maximum allowable length that can be cut.
- Only 1 repair is allowed per air line.
- If the air line cannot be repaired to factory level quality at any point in this procedure, discontinue this procedure and replace the air line assembly.
Tip: Use of the following tool(s) is recommended:- LED Flashlight LED
- Digital Calipers 6in
-
Use a marker to mark the
section to be removed, and then use a plastic tube cutter to remove the
damaged section from the air line.
WarningWear cut resistant gloves and eye protection when making the cut.CAUTION5mm is the maximum allowable length that can be cut.Tip: Use of the following tool(s) is recommended:
- Plastic Tube Cutter
- Digital Calipers 6in
-
Remove and discard the white
plug from each end of the 4mm brass VOSS union, and then torque both
fittings.Tip: Use a wrench to counter hold the brass VOSS union to torque the fittings.Tip: Use of the following tool(s) is recommended:
- 10 mm socket
- 12 mm combination wrench
-
Insert the air line fully
into the fitting on each side of the brass VOSS union, and then lightly pull
on the lines to make sure they are secured.
-
Apply harness tape onto the
brass VOSS union connection to prevent NVH concerns.