2020-03-02

Nozzle - Windshield Washer Jet (Remove and Replace)

Correction Code 17501302

Removal

  1. Remove the hood acoustic panel (refer to procedure).
  2. Disconnect the washer jet pipe from the T-piece.
  3. Release the clip that secures the washer jet to the hood. Remove the washer jet from the hood.
  4. Disconnect the washer pipe from the washer jet.

Installation

Installation procedure is the reverse of removal, except for the following:

Align the washer jet angle to between the middle of the windshield and 15 mm above the black border of dots (frit) along the bottom of the windshield (11 degrees +/- 1 degree).