4410 - Onboard Charger Actuator - Dual Motor - Charger Port (China) (Remove and Replace) Correction Code 44105402 Slave Charger - LH - 1st Generation (Remove and Replace) Correction Code 44101102 Slave Charger - LH - 2nd Generation (Remove and Replace) Correction Code 44102102 Master Charger - RH - 1st Generation (Remove and Replace) Correction Code 44100202 Master Charger - RH - 2nd Generation (Remove and Replace) Correction Code 44102202 Master Charger - RH - 2nd Generation - Dual to Single Charger (Modify) Correction code 44102207 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See to make sure wearing proper PPE when performing the below procedure. Charger - 3rd Generation (Remove and Replace) Correction Code 44103002 Charger (China) (Remove and Replace) Correction Code 44103012 Charge Port (Retrofit) (China) Correction Code 44103006 Parent topic: 44 - HIGH VOLTAGE SYSTEM