23/05/2022 05:04:45

Applique - Fascia - Rear (Remove and Replace)

Correction Code 10013402

Removal

  1. Remove the rear fascia assembly. See Fascia Assembly - Rear (Remove and Install).
  2. Loosen the clips that attach the reflectors to the rear fascia applique, and then remove both reflectors.
  3. Remove the screws (x2) that attach the diffuser to the rear fascia (torque 1.5 Nm).
  4. Loosen the clips (x10) and push clips (x2) that attach the diffuser to the rear fascia and the rear fascia applique, and then remove the diffuser.
  5. Loosen the clips (x10) and push clips (x2) that attach the rear fascia applique to the rear fascia, and then remove the rear fascia applique.

Installation

Installation procedure is the reverse of removal, except for the following:
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Replace any broken clips.