02/03/2020 13:50:14

Motor - Seat Height - Driver's Seat (Remove and Replace)

Correction Code 13011602

Removal

  1. Power the seat fully upward, away from the floor.
  2. Remove the driver's seat outer side cover (refer to procedure).
  3. Disconnect the seat height motor connector and harness.
  4. Remove the outboard nuts (x3) that secure the seat height motor to the seat (torque 8 Nm).
  5. Remove the inboard screw that secures the seat height motor to the seat frame (torque 12 Nm).
  6. Remove the seat height motor.

Installation

  1. Installation procedure is the reverse of removal.
    Informational PurposesAn informational icon, calling your attention
    Note
    Clean the affected areas before installation.