02/03/2020 13:50:14

12V Battery Bracket Beam (Remove and Replace)

Correction Code 17012702

Removal

  1. Remove the 12V battery. See Battery - Auxiliary - 12V (Remove and Replace) .
  2. Release the 2 bolts that attach the 12V battery bracket to the front crossmember (torque 15 Nm).
  3. Remove the 12V battery tray.
  4. Release the 2 clips that secure the battery sensor harness to the bracket.
  5. Release the barrel clip that attaches the coolant hose to the rear of the bracket.
  6. Release the bolt that attaches the coolant hose retaining ring to the battery support brace (torque 5 Nm). Gently pull the hose away from the brace.
  7. Remove the bolts (x2) that attach the bar to the 12V battery bracket beam.
  8. On each side of the vehicle, release the bolt that attaches the battery support brace to the front frame rail (torque 3.5 Nm). Remove the battery support brace and bracket assembly.

Installation

Installation procedure is the reverse of removal.