22/09/2022 11:36:43

Stabilizer Bar - Rear (Remove and Replace)

Correction Code 31033102

Removal

  1. Remove rear sub-frame assembly (refer to procedure)
  2. Remove nuts (x2) securing stabilizer bar to drop links (torque 70 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    To prevent ball joint damage, always hold the ball joint pin with a wrench while loosening or tightening the lock nut.
  3. Remove bolts (x2) securing brackets to rear subframe (torque 70 Nm).
  4. Release and remove brackets.
  5. Remove stabilizer bar.

Installation

Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Replace all patchbolt(s).
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Replace all nylon-insert locknuts.
  1. Install the stabilizer bar to the subframe and install the brackets.
  2. Install the bolts (x2) that attach the brackets to rear subframe (torque 70 Nm).
  3. Install the nuts (x2) that attach the stabilizer bar to the drop links (torque 70 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    To prevent ball joint damage, always hold the ball joint pin with a wrench while loosening or tightening the lock nut.
  4. Install the rear sub-frame assembly (refer to procedure).
  5. Refer to the Alignment Requirement tables to determine whether an EPAS alignment check (EC) or four wheel alignment check (AC) is necessary. If performed, add the alignment check/adjust as a separate activity. See Alignment Requirement - Suspension.