28/08/2020 14:09:37
Module - Memory Seat (Remove and Replace)
Correction Code 13010602
Warning
If the 12V power
supply is disconnected, do not attempt to open any doors with door glass in
closed position. Failure to follow this instruction could result in door glass
shatter.
Note
Before
disconnecting the 12V power supply, ensure that the driver’s door window is
fully open. Failure to follow this instruction could result in vehicle
lockout.
Removal
- Open the door.
- Move the seat height fully upwards for access.
- Disconnect 12V power. See Disconnect 12V Power .
-
Disconnect the memory seat module harness connections (x2).
- Release the clips (x2) that secure the memory seat module to the seat.
- Remove the memory seat module.
Installation
Installation procedure is the reverse of removal, except for the following:
- Reinstall the latest vehicle firmware, or update the firmware if not the latest. See Firmware Reinstall - Touchscreen or Firmware Update.