02/03/2020 13:50:14

Bash Plate - Front - Extrusion (Remove and Replace)

Correction Code 30011402

Removal

  1. Raise and support the vehicle (refer to procedure).
  2. Remove and discard the bolts (x2) that secure the bash plate extrusion to the front subframe (16 Nm).
  3. Remove the bash plate extrusion.

Installation

  1. Installation procedure is the reverse of removal.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use new bolts to install the bash plate extrusion. Do not reuse any bolts.