2020-03-02

Antenna - RF Filter - RH (Remove and Replace)

Correction Code 21301002

Removal

  1. Remove the RH liftgate trim (refer to procedure).
  2. Remove the screw that secures the RF filter to the liftgate (torque 1 Nm).
  3. Remove the RF filter from the vehicle.

Installation

Installation procedure is the reverse of removal, except for the following:
  1. Replace the adhesive strip if necessary.
    Informational PurposesAn informational icon, calling your attention
    Note
    Clean the affected areas before installation.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Apply contact adhesive to mating faces if bond has been broken.