06/01/2021 17:51:35

Assembly - Instrument Panel Side Cover - LH (Remove and Replace)

Correction Code 14054102

Removal

  1. Release clips (x3) securing instrument panel side cover.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Wear cut-resistant gloves when performing this step to avoid personal injury.
    Informational PurposesAn informational icon, calling your attention
    Note
    Components have been removed in this graphic to aid clarity.
  2. Disconnect harness connector from key antenna.
  3. Remove screws (x2) securing antenna to trim (torque 1 Nm).
  4. Remove instrument panel side cover.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Replace any broken clips.

Installation

  1. Installation procedure is the reverse of removal.