2026-11-11

Jumpstart Vehicle (Restore)

Correction code 17000008 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

  • 2026-11-11: Released new procedure.

Procedure

  1. Release the clips (x7) that secure the applique and connectors (x2), then remove the applique.
    Tip
    Carefully pry the fascia center applique outwards using a plastic pry tool in the top right corner.
  2. Connect the jumper leads to the 12V battery positive and negative posts on the front bumper assembly and perform a jump start per the jump starter instructions.
    Note
    If using an XP-20 jump starter, press the power button, then press and hold "Bypass" to initiate the jump-start.