02/03/2020 13:50:14
Trim - Touchscreen Surround (Remove and Replace)
Correction Code 14053002
Removal
- Remove the MCU (refer to procedure).
- Remove the screws (x6) that secure the touchscreen surround (torque 4 Nm).
- Cut the cable tie that secures the Bluetooth antenna to the edge clip on the touchscreen surround.
- Remove the touchscreen surround from the MCU.
- Remove the screws that secure the switches to the touchscreen surround (1 Nm).
-
Release the trim from both switches.
CAUTIONTake care not to damage component(s).
Installation
- Replace the cable tie that secures the Bluetooth antenna to the edge clip on the bezel.