28/08/2020 14:09:32
Module - HVAC Controller - RCCM (Remove and Replace)
Correction Code 18100602
Removal
- Remove the IP carrier (refer to procedure).
- Disconnect the HVAC harness connector from the Remote Climate Control Module (RCCM).
-
Remove the screws (x4) that secure the RCCM to the HVAC casing (torque 1.2
Nm).
-
Remove the RCCM from the HVAC mounting.
Installation
Installation procedure is the reverse of removal, except for the following:
- Reinstall the latest vehicle firmware, or update the firmware if not the latest. See Firmware Reinstall - Touchscreen or Firmware Update.