2026-08-09

Seal - Body - Side - Front - Primary - LH (Remove and Replace)

Correction Code 11700302

Removal

  1. Remove the 'B' post upper trim (refer to procedure).
  2. Release the clips (x3) that secure the leading edge of the seal to the body.
    CAUTION
    Take care not to damage component(s).
    CAUTION
    Protect exterior paint surfaces during this procedure.
    Note
    Components have been removed in this graphic to aid clarity.
  3. Release the clips (x2) that secure the upper trailing edge of the seal to the body.
  4. Carefully release the seal from the rocker panel and work towards the upper section of the seal.
  5. Release the remaining seal from the brightwork.
  6. Remove the seal.

Installation

  1. Locate the seal end stop into the brightwork, and then install the clips to align the seal.