06/03/2023 14:30:27
Handle - Exterior Release - Door - Rear - LH - Generation 3.0 (Remove and Replace)
Correction Code 11452012
Removal
- Remove the exterior handle assembly (refer to procedure).
- Remove the backplate from the assembly (refer to procedure).
- Remove the LED from the handle grip (refer to procedure).
- Remove the handle grip (refer to procedure).
Installation
Installation procedure is the reverse of removal, except for the following:
-
WarningAlways replace plugs or tape removed from the front door shells when servicing or inspecting the door or its components. Additional holes in the door creates more escape paths for air, which decreases the front door pressure sensor's ability detect a side impact, and can negatively affect airbag deployment.
- After installing and aligning the new door handle, perform the door handle calibration routine. See Handle - Exterior Release - Door (Recalibrate).
- Reinstall the vehicle firmware. See Firmware Reinstall - Touchscreen.