02/03/2020 13:50:14

USB Socket - Center Console - Rear (Remove and Replace)

Correction Code 21260102

Removal

  1. Remove center console assembly (refer to procedure)
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Disconnect 2 USB harness connectors located at extreme front of center console before removing console from vehicle.
  2. Position center console on suitable clean bench to prevent damage.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
  3. Remove center console vent (refer to procedure)
  4. Remove screws (x2) securing cup holder front trim to chassis (torque 2 Nm).
  5. Release clips (x2) and remove cup holder front trim.
  6. Remove cup holder mat to access screws.
  7. Carefully lift vertically to release clips (x7) securing arm rest and cup holder trim.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Replace any broken clips.
  8. Remove clips for air ducting to allow more movement for access.
  9. Remove screws (x4) securing air ducting framework to center console chassis (torque 2 Nm).
  10. Disconnect USB socket connectors (x2).
  11. Remove screws (x2) securing USB socket to center console (torque 1 Nm).
  12. Remove USB socket.

Installation

  1. Installation procedure is the reverse of removal.