26/07/2023 16:58:26

Cooling System - Check and Fill

Correction Code 18300200

Check & Top-Up

  1. Open the LH front door and lower the LH front window.
  2. Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
  3. Remove the coolant reservoir cap.
  4. Fill the reservoir to the "Max" level.
  5. Connect a laptop with Toolbox 3 to the vehicle. See Toolbox 3 (Connect and Disconnect).
  6. In Toolbox 3, click the Actions tab, type "Coolant air purge" into the search field, click PROC_THC_X_COOLANT-AIR-PURGEvia Toolbox: (link)via Service Mode: Thermal ➜ Actions ➜ Coolant Air Purge, click Run, and allow the routine to complete.
  7. Disconnect a laptop with Toolbox 3 to the vehicle. See Toolbox 3 (Connect and Disconnect).
  8. Reinstall the reservoir cap.
  9. Install the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
  10. Raise the LH front window and close the LH front door.